diagDisablePost
Disables power-on self-test (POST).
Synopsis
diagdisablepost
Description
Use this command to disable POST. A reboot is not required for this command to take effect.
Note
The execution of this command is subject to Admin Domain restrictions that may be in place. Refer
to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability"
for details.
Operands
none
Examples
To disable the POST during future power ons:
See Also
diagEnablePost
Fabric OS Command Reference
53-1000599-02
switch:admin> diagdisablepost
Config update Succeeded
Diagnostic POST is now disabled.
2
diagDisablePost
103