Fandisable - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

2

fanDisable

fanDisable
Disables a fan unit.
Synopsis fandisable unit
Description Use this command to disable a non-faulty fan unit by setting the RPM speed to 0.
Notes This command is not available on non-bladed systems except for the Brocade 4100 and 4900.
The execution of this command is subject to Admin Domain restrictions that may be in place. Refer
to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability"
for details.
Operands This command has the following operand:
unit
Examples To disable a fan unit:
See Also fanEnable, fanShow
140
Specifies the number of the fan unit to disable.
switch:admin> fandisable 1
Fan unit 1 has been disabled
Fabric OS Command Reference
53-1000599-02