Zoneadd - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

zoneAdd

Adds a member to the zone.
Synopsis zoneadd "zoneName", "member;member"
Description Use this command to add one or more members to an existing zone.
This command changes the defined configuration. For the change to be preserved across switch
reboots, save the configuration to nonvolatile memory with the cfgSave command. For the change
to become effective, enable the configuration with the cfgEnable command.
Note When FCS policy is enabled, this command can be issued only from the primary FCS switch.
Operands The following operands are required:
"zoneName"
"member"
Examples To add aliases for three disk arrays to "Blue_zone":
See Also zoneCreate, zoneDelete, zoneRemove, zoneShow
Fabric OS Command Reference
53-1000599-02
Specify the name of an existing zone. Quotation marks are optional.
Specify a member or list of members to be added. The list must be enclosed
in quotation marks. Members must be separated by semicolons. Valid values
can be one or more of the following:
A switch domain and port area or index number pair; for example, "2, 20".
View the area or index numbers for ports using the switchShow command.
•
Node or port WWN.
•
Zone alias name.
sw5:admin> zoneadd "Blue_Zone", "array3; array4; array5"
2
zoneAdd
707