Portswapshow - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

2

portSwapShow

portSwapShow
Displays the state of the portswap feature.
Synopsis portswapshow
Description Use this command to display the enabled state of the portswap feature, as well as port and area
information for ports whose area number differs from the default area number. The default area
number of a port is the same as its switch port number.
Operands none
Examples To display the enabled state of the portswap feature and information for ports whose area numbers
have been swapped:
See Also portSwap, portDisable, portEnable, portShow, portSwap, portSwapDisable, portSwapEnable,
switchShow
538
switch:admin> portswapshow
PortSwap is enabled
Slot Slotport
============================================
2 2
2 3
Swport Area
18 19
19 18
Fabric OS Command Reference
53-1000599-02