Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 49

--failbackdisable N_Port
--failbackshow [N_Port]
--prefset "F_Port [;F_Port2;...]" N_Port
--prefdel "F_Port [;F_Port2;...]" N_Port
--prefshow
--adsset "F_Port [;F_Port2;...]" "WWN [;WWN2;...]"
--adsadd "F_Port [;F_Port2;...]" "WWN [;WWN2;...]"
--adsdel "F_Port [;F_Port2;...]" "WWN [;WWN2;...]"
Fabric OS Command Reference
53-1000599-02
•
If preferred Secondary F_Port to N_Port Mapping is in place, and the
primary N_Port comes back online, then the F_Ports are re-routed
through the primary N_Port. If the secondary N_Port comes online, while
the primary N_Port is still offline, F_Ports are re-routed through the
Secondary N_Port.
Disables the failback policy for the specified N_Port
If N_Port is specified (optional), the command displays the failback policy for
this N_Port. Otherwise, the failover policy for all the N_Ports is displayed. The
failback policy is displayed as disabled (0) or enabled (1).
Sets the preferred Secondary N_Port for one or more F_Ports. Preferred
mapping is optional. Preferred F_Port to N_Port Mapping provides an
alternate N_Port for F_Ports to come online for predictable failover and
failback. An F_Port must have primary N_Port mapping before a secondary
N_Port can be configured. The list of F_Ports to be mapped must be enclosed
in quotation marks. Port numbers must be separated by semicolons.
Deletes the preferred Secondary N_Port for the specified F_Ports. The list of
F_Ports to be deleted from the secondary mapping must be enclosed in
quotation marks. Port numbers must be separated by semicolons.
Displays the preferred Secondary N_Port for all F_Ports.
Sets the list of devices that are allowed to login to a specified set of F_Ports.
Devices are specified by their world wide names Lists must be enclosed in
double quotation marks. List members must be separated by semicolons.
The maximum number of entries in the allowed device list is twice the per
port maximum login count. Replace the WWN list with an asterisk (*) to
indicate all access on the specified F_Port list. Replace the F_Port list with an
asterisk (*) to add the specified WWNs to all the F_Ports' allow lists. A blank
WWN list ("") indicates no access. ADS policy must be enabled for this
command to succeed.
Adds the specified WWNs to the list of devices allowed to login to the
specified F_Ports. Lists must be enclosed in double quotation marks. List
members must be separated by semicolons. Replace the F_Port list with an
asterisk (*) to add the specified WWNs to all the F_Ports' allow lists. ADS
policy must be enabled for this command to succeed.
2
ag
23