Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 155

nbrWWN
nbrPort
lr_tid
red_ports
Note The execution of this command is subject to Admin Domain restrictions that may be in place. Refer
to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability"
for details.
Operands This command has the following operands:
slotnumber
portnumber
Fabric OS Command Reference
53-1000599-02
0x00000800 Zoning has completed
0x00001000 Segmented by Platform Management
0x00002000 Segmented due to no license
0x00004000 Segmented due to E_Port disabling
0x00008000 DIA already sent for that port
0x00010000 RDI already sent
0x00020000 Port is true T port
0x00040000 Port received an ELP
0x00080000 Port received an ELP RJT
0x00100000 LR pending due to ELP RJT rcv
0x00200000 Received a DIA on this port
0x00400000 Port is the EMT Initiator
0x00800000 Security violation
0x01000000 Security incompatibility
0x02000000 Rcv a DIA ACC
0x040000000 Port is security authenticating
0x080000000 ECP RJT or retires exceeded
0x100000000 Segmented due to duplicated WWN
0x200000000 Segmented due to E_Port isolation
Neighboring switch's WWN
Neighboring switch's port
Link reset timer identifier and current state.
All E_Ports that are connected to the same neighboring switch
For bladed systems only, specifies the slot number of the port to display,
followed by a slash (/).
Specifies the port number to display, relative to its slot for bladed systems.
Use switchShow to list valid ports.
2
fabPortShow
129