Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 322

2
ipfilter
To create an IPv4-type IP filter policy:
To add a rule to the created policy "ex2":
To display the IP filter policies, including the new policy:
To save the IP Filter policy "ex2" (the status of the policy changes from modified to defined after the
policy is saved):
See Also policy, distribute
296
switch:admin> ipfilter --create ex2 -type ipv4
switch:admin> ipfilter --addrule ex2 -sip 10.32.69.99 -dp 23 -proto tcp -act permit
switch:admin> ipfilter --show
Name: default_ipv4, Type: ipv4, State: active
Rule Source IP
1 any
2 any
3 any
4 any
5 any
6 any
7 any
8 any
9 any
10 any
11 any
12 any
Name: ex2, Type: ipv4, State: defined (modified)
Rule Source IP
1 10.32.69.99
switch:admin> ipfilter --save ex2
switch:admin> ipfilter --show
Name: default_ipv4, Type: ipv4, State: active
Rule Source IP
1 any
2 any
3 any
4 any
5 any
6 any
7 any
8 any
9 any
10 any
11 any
12 any
Name: ex2, Type: ipv4, State: defined
Rule Source IP
1 10.32.69.99
Protocol Dest Port
tcp 22 permit
tcp 23 permit
tcp 897 permit
tcp 898 permit
tcp 111 permit
tcp 80 permit
tcp 443 permit
udp 161 permit
udp 111 permit
udp 123 permit
tcp 600 - 1023
udp 600 - 1023
Protocol Dest Port
tcp 23 permit
Protocol Dest Port
tcp 22 permit
tcp 23 permit
tcp 897 permit
tcp 898 permit
tcp 111 permit
tcp 80 permit
tcp 443 permit
udp 161 permit
udp 111 permit
udp 123 permit
tcp 600 - 1023
udp 600 - 1023
Protocol Dest Port
tcp 23 permit
Fabric OS Command Reference
Action
permit
permit
Action
Action
permit
permit
Action
53-1000599-02