Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 717

The backup account database is no longer supported on switches running Fabric OS v6.0 or later.
As a consequence, account recovery from backup as well as backup display option (former --show
-b option) are no longer supported in Fabric OS v6.0 or later.
The execution of this command is subject to Admin Domain restrictions that may be in place. Refer
to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability"
for details.
Operands When executed without operands, this command displays the usage. The following operands are
supported:
--show
--showad
--add
--change
Fabric OS Command Reference
53-1000599-02
Displays user account information. Only accounts with SecurityAdmin and
Admin roles can show information about accounts other than the current
login account. The following operands are optional:
username Specifies account login name. When no operand is specified, the command
displays the current account information.
-a Displays information about all accounts.
Displays Admin Domain permissions. The following operand is required:
-a AD_ID_list For each AD in AD_ID_list, displays a list of users that include that AD in their
AD permissions. Specify a range (1-5) or a list of AD_IDs separated by comma
(1,2,3), or a combination of both (1-5,7). Only users with SecurityAdmin or
Admin role may execute this command
Creates a new user account or modifies an existing user account. The
following rules apply:
•
You cannot change the role, AD permissions, or home AD of any default
account.
•
You cannot change the role, AD permissions, or description of accounts
at the same or higher authorization level.
•
You cannot change the role, AD permissions, or home AD of your own
account.
•
No account can disable itself.
•
AD permissions must be a subset of the AD permissions of the account
that creates or modifies a user account.
The following operands are supported with the --add and --change options:
username Specifies the login name of the account to be created or modified. Enter a
valid login name to modify an existing account. For new accounts, the name
must be unique, between 8 and 40 characters long, and must begin with an
alphabetic character. User names are case-sensitive and can contain
alpha-numeric characters, periods (.), and underscore (_ ) characters. The
account name cannot be the same as a role name.
-r rolename Specifies the role for the account. Valid roles are: User, SwitchAdmin,
ZoneAdmin, FabricAdmin, BasicSwitchAdmin, Operator, or Admin. This
operand is required with the --add option; it is optional with the --change
option.
2
userConfig
691