Chapter 4 Control Processor Commands; Commands Supported On The Standby Cp - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

Control Processor Commands
This chapter lists the commands available when logged in to the standby CP on a Brocade 48000
or DCX Backbone. The full set of commands for your user role is available on the active CP.

Commands supported on the standby CP

The following commands are supported when logged into the standby CP.
TABLE 23
Command
aptPolicy
date
dbgShow
errClear
errDump
errModuleShow
errShow
fastboot
firmwareCommit
firmwareDownload
firmwareDownloadStatus
firmwareKeyShow
firmwareKeyUpdate
firmwareRestore
firmwareShow
h
haDump
haShow
help
ifModeSet
ifModeShow
killTelnet
login
Fabric OS Command Reference
53-1000599-02
Commands supported on the standby CP
Description
Displays the Advanced Performance Tuning (APT) policy. You cannot modify the
parameters on s standby CP.
Displays or sets the system date and time.
Displays current values of debug and verbosity levels of the specified module.
Clears the error log.
Displays the error log (no page breaks).
Displays all defined error log modules.
Displays the error log.
Reboots the standby CP bypassing POST. This comand does not reboot the switch
from standby.
Commits the firmware to nonvolatile memory.
Downloads the firmware onto switch.
Displays the progress and status of a firmware download.
Displays the keys used to check firmware signatures.
Manages the keys used to check firmware signatures.
Restores the firmware on the switch.
Displays firmware versions.
Displays shell history.
Dumps High Availability debug data.
Displays High Availability status.
Displays the list of available commands.
Sets the link operating mode for a network interface.
Displays the link operating mode for a network interface.
Terminates Telnet/serial login sessions interactively.
Logs in as new user.
Chapter
4
719