Portstatsshow - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

portStatsShow

Displays port hardware statistics.
Synopsis portstatsshow [slotnumber/]portnumber
portstatsshow [ge | ip | fcip ] [slotnumber/]geportnumber [ipaddress | tunnelnumber]
Description Use this command to display port hardware statistics counters. Some counters are platform- and
port-specific and display only with those platforms and ports. All statistics have a maximum 32-bit
value of 4,294,967,295.
The command output includes the following fields:
stat_wtx
stat_wrx
stat_ftx
stat_frx
stat_c2_frx
stat_c3_frx
stat_lc_rx
stat_mc_rx
stat_mc_to
stat_mc_tx
tim_rdy_pri
tim_txcrd_z
er_enc_in
er_crc
er_trunc
er_toolong
er_bad_eof
er_enc_out
er_bad_os
er_c3_timeout
er_c3_dest_unreach The number of class 3 frames discarded due to destination unreachable
Fabric OS Command Reference
53-1000599-02
The number of 4-byte words transmitted.
The number of 4-byte words received.
The number of frames transmitted.
The number of frames received.
The number of class 2 frames received.
The number of class 3 frames received.
The number of link control frames received.
The number of multicast frames received.
The number of multicast timeouts.
The number of multicast frames transmitted.
The amount of time elapsed during which sending R_RDY or VC_RDY primitive
signals was a higher priority than sending frames, due to diminishing credit
reserves in the transmitter at the other end of the fibre. This parameter is
sampled once every 348 106.25 MHz clocks, and the counter is incremented
by 1 if the condition is true.
The amount of time during which frame transmission is blocked by a transmit
credit of 0. The counter is incremented by 1 every time that the transmit
credit was zero when the condition was true.
The number of encoding errors inside frames.
The number of frames with CRC errors.
The number of frames shorter than minimum.
The number of frames longer than maximum.
The number of frames with bad end-of-frame.
The number of encoding error outside frames.
The number of invalid ordered sets (platform- and port-specific).
The number of class 3 frames discarded due to timeout (platform- and
port-specific).
(platform and port specific).
2
portStatsShow
531