Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 40

2
ad
Examples To enable AD5:
To enable AD_13:
To add new device members to AD1:
To apply all changes made to the Admin Domain configurations since
To clear all Admin Domain definitions:
To create an Admin Domain with a mix of D,PI, WWNs, and zone alias device members (two
different methods shown):
To create an Admin Domain with two switches identified by domain ID and switch WWN:
To create an Admin Domain with a device list and a switch list:
To deactivate Admin Domain 5:
To delete AD13:
14
switch:admin> ad --activate 5
You are about to activate a new admin domain.
Do you want to activate '5' admin domain (yes, y, no, n): [no] y
switch:admin> ad --activate AD_13
switch:admin> ad --add AD1, -d "100,5; 4,1"
switch:admin> ad --apply
You are about to enforce the saved AD configuration.
This action will trigger ad --apply to all switches in the fabric.
Do you want to apply all admin domains (yes, y, no, n): [no] y
switch:admin> ad --clear
You are about to delete all ADs definitions.
This operation will fail if zone configurations exists in AD1-AD254
Do you want to clear all admin domains (yes, y, no, n): [no] y
switch admin> ad --create "AD1", -d "100,5; 1,3; 20:00:00:e0:8b:05:4d:05"
switch admin> ad --create 1, -d "100,5; 1,3; 21:00:00:e0:8b:05:4d:05"
switch:admin> ad --create "AD1", -s "100; 10:00:00:60:69:80:59:13"
switch:admin> ad --create "AD1", -d "100,5; 1,3; 21:20:00:00:e0:8b:05:4d:05" -s "100;
10:00:00:60:69:80:59:13"
switch:admin> ad --deactivate 5
You are about to deactivate an AD.
This operation will fail if an effective zone configuration exists in the AD
Do you want to deactivate '5' admin domain (yes, y, no, n): [no] y
switch:admin> ad --delete 13
You are about to delete an AD.
apply was last executed:
--
Fabric OS Command Reference
53-1000599-02