Timeout - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

timeOut

Sets or displays the idle timeout value for a login session.
Synopsis timeout [timeval]
Description Use this command without operand to display the current timeout value (in minutes) after which
idle logins are automatically terminated.
Use this command with the timeval operand to set the login timeout value to the specified interval.
A value of 0 disables timeout of login sessions.
The new timeout value takes effect with the next logins.
Note The execution of this command is subject to Admin Domain restrictions that may be in place. Refer
to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability"
for details.
Operands This command has the following operand:
timeval
Examples To set the idle timeout to 10 minutes:
See Also none
Fabric OS Command Reference
53-1000599-02
Specify the number of minutes for the Telnet timeout value. Valid values are 1
to 99,999, or 0 to disable login timeouts. This operand is optional; if omitted,
the command displays the current timeout value.
switch:admin> timeout 10
IDLE Timeout Changed to 10 minutes
The modified IDLE Timeout will be in effect after NEXT login
2
timeOut
665