Fcprlsshow - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

fcpRlsShow

Displays the Fibre Channel Protocol (FCP) Read Link Status (RLS) information.
Synopsis fcprlsshow [slotnumber/]portnumber
Description Use this command to display the FCP RLS information for the specified F_Port or FL_Port. This
information describes the number of loss-of-signal, loss-of-sync, CRC-error, and other failure events
that have been detected on this port.
Operands This command has the following operands:
slotnumber
portnumber
Examples To display the FCP RLS information:
See Also portLoginShow, portLogShow
Fabric OS Command Reference
53-1000599-02
For bladed systems only, specify the slot number of the port to display,
followed by a slash (/).
Specify the port number to display, relative to its slot for bladed systems. Use
switchShow to list valid ports. This operand is required.
switch:admin> fcprlsshow 2/5
link fail loss sync
0xda 0
0xdc 0
loss sig prtc err
5 0
3 0
fcpRlsShow
bad word crc err
0 525
0 330
2
0
0
159