Errshow - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

2

errShow

errShow
Displays the error log messages with pagination.
Synopsis errshow [-s switch_instance][-r][-p]
Description Use this command to display external error log messages for all switch instances and the chassis,
one at a time. The -r operand displays the messages in a reversed order. The following information
displays in each message:
Start delimiter
Timestamp
Message ID
External sequence number
Security audit flag
Severity
Switch name
Message
End delimiter
Operands This command has the following operands:
-s switch_instance
-r
-p
Examples To display the error log with pagination:
See Also errDelimiterSet, errDump, errFilterSet
126
Delimiter string for the start of a message.
Timestamp for the message.
Message identifier.
Sequence number for the message
Security audit logged. AUDIT displays in the field.
Severity of the message. Valid values include INFO, WARNING, ERROR, and
CRITICAL.
Switch name for the generator of this message, or "chassis".
Message body.
Delimiter string for the end of a message.
Displays messages only from switch_instance. Valid values are 0 or 1. This
operand is optional; if omitted, messages from all switch instances are
displayed.
Displays messages in reversed order. This operand is optional; if omitted, the
messages display in the normal order.
Displays error logs from Fabric OS versions prior to v4.2.
switch:user> errshow
Version: 4.4.0
2004/07/14-22:24:08, [HAMK-1003], 1,, INFO, switch1, Heartbeat up
Type <CR> to continue, Q<CR> to stop:
2004/07/14-22:24:47, [FSSM-1002], 2,, INFO, switchChassis, HA State is in sync
Type <CR> to continue, Q<CR> to stop:
2004/07/14-22:25:29, [SEC-1192], 3,, INFO, switch2, Security violation: Login
failure attempt via SERIAL.
Type <CR> to continue, Q<CR> to stop:
Fabric OS Command Reference
53-1000599-02