Secactivesize - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

secActiveSize

Displays the size of the active security database.
Synopsis secactivesize
Description Use this command to display the size of the active security database. The command also displays
the maximum database size.
For switches running Fabric OS v6.0.0 and later, the maximum security database size is 1
Megabyte. For switches running earlier versions of Fabric OS (up to v5.3.0), the maximum is 256
Kilobytes.
Notes The effective security DB size is the lowest supported by the fabric. The presence of a Standby CP
that runs an earlier version of the operating system will drop the effective security DB size on an
Active CP that runs Fabric OS v6.0.0.
The Brocade 200E is unable to handle the maximum DB size supported in v6.0.0 and issues a
compact flash warning when the active security database is close to the 1MB limit.
The execution of this command is subject to Admin Domain restrictions that may be in place. Refer
to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability"
for details.
Operands none
Examples To display the size of the active security database:
See Also secDefineSize, secGlobalShow
Fabric OS Command Reference
53-1000599-02
switch:admin> secactivesize
Size of security active data: 35 bytes (Max 1048576 bytes)
2
secActiveSize
555