Diagshow - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

2

diagShow

diagShow
Displays diagnostics status.
Synopsis diagshow [--slot number][-uports itemlist][-bports itemlist][-use_bports value]
Description Use this command to display the diagnostics status for the specified list of blade or user ports.
Note The execution of this command is subject to Admin Domain restrictions that may be in place. Refer
to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability"
for details.
Operands This command has the following optional operands:
--slot number
-uports itemlist
-bports itemlist
-use_bports value
Notes The execution of this command is subject to Admin Domain restrictions that may be in place. Refer
to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability"
for details.
Examples To display diagnostic status on a switch blade:
See Also itemList
110
Specify which slot to operate on. If this option is not specified, the default slot
0 is used. The default slot is designed to operate on fixed-port-count
products. By default, this command displays all user ports in the system.
Specify a list of user ports to display.
Specify a list of blade ports to display.
If this value is not 0 the diagnostics status for the blade ports specified in
-use_bports displays; otherwise, the user ports specified in -uports displays.
The default value is 0.
switch:admin> diagshow
Diagnostics Status:
Slot: 1 UPORTS
Port BPort Diag
0 15 OK
1 14 OK
2 13 OK
3 12 OK
4 31 OK
5 30 OK
6 29 OK
7 28 OK
8 47 OK
(output truncated)
Fri Feb 08 15:25:24 2002
Active Speed
UP 2G Auto
UP 2G Auto
UP 2G Auto
UP 2G Auto
UP 2G Auto
UP 2G Auto
UP 2G Auto
UP 2G Auto
UP 2G Auto
......
......
......
......
......
......
......
......
......
......
Fabric OS Command Reference
53-1000599-02