Mstdenable - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

2

msTdEnable

msTdEnable
Enables the Management Server (MS) topology discovery service.
Synopsis mstdenable ["ALL"]
Description Use this command to enable the MS topology discovery service on the local switch or throughout
the fabric. The change takes effect immediately and commits to the configuration database for all
affected switches. The change is persistent across power cycles and reboots.
Notes Topology Discovery Management requires the attached devices (including attached switches) to
support request node identification data (RNID) extended link service (ELS).
When FCS policy is enabled, and this command is issued with the "ALL" operand, it can be issued
only from the primary FCS.
The execution of this command is subject to Admin Domain restrictions that may be in place. Refer
to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability"
for details.
This command is supported only in AD0 and AD255 contexts.
Operands The following operand is optional:
"ALL"
Examples To enable the MS topology discovery service on the local switch:
To enable MS topology discovery on all switches in the fabric:
See Also msTdDisable, msTdReadConfig
354
Enables the MS topology discovery service throughout the fabric. This
operand must be enclosed in double quotation marks.
switch:admin> mstdenable
Request to enable MS Topology Discovery Service in progress....
done.
*MS Topology Discovery enabled locally.
switch:admin> mstdenable "ALL"
Request to enable MS Topology Discovery Service in progress....
done.
*MS Topology Discovery enabled locally.
*MS Topology Discovery Enable Operation Complete!!
Fabric OS Command Reference
53-1000599-02