Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 335

--show
slot
geport
-h
Examples To modify the port parameters:
To display the port information in verbose mode:
Fabric OS Command Reference
53-1000599-02
Displays port-level protocol parameters, statistics, and session information
on the specified port. Options include:
-v Specifies verbose mode, which displays the initiator IP, TSID, and the number
of connections in addition to the other port-level information.
Specifies the slot number. This parameter only supports FC4-16IP blades in
Brocade 48000 directors.
Specifies the port number of a GbE port to be configured in the specified slot.
Use -h on any option to display the help text for it.
switch:admin> iscsiportcfg --modify 7/ge2 -e 2 -c 2 -f 32768
The operation completed successfully.
switch:admin> iscsiportcfg --show 7/ge0
The configured port parameters for slot 7 and port ge0 are:
Header Digest:
Data Digest:
First Burst Length:
Error Recovery Level:
Immediate Data:
Connections per session:
Num. of active sessions on port: 1
Port Statistics:
iSCSI in PDU:
iSCSI in Octet:
iSCSI out PDU:
iSCSI out Octet:
FCP in PDU:
FCP in Octet:
FCP out PDU:
FCP out Octet:
iSCSI Command:
iSCSI R2T:
iSCSI Data In:
iSCSI Data Out:
iSCSI Response:
FCP Command:
FC Data In:
FC Data Out:
FC XFer Ready:
FC Response:
iSCSI Error PDU:
FC Error PDU:
iSCSI Snack:
iSCSI NOP Out:
iSCSI Text:
iSCSI Logout:
iSCSI Task Mgmt.:
iSCSI TM Response:
iSCSI Abort Task:
Off
Off
512
0
Off
1
211
32592
307
77484
205
76356
114
29944
104
11
11
96
104
103
91
11
11
103
0
0
0
0
1
1
0
0
0
2
iscsiPortCfg
309