Iclcfg - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

iclCfg

Enables or disables Inter-chassis links (ICL).
Synopsis iclcfg --enable slot/icl_group
iclcfg --disable slot/icl_group
iclcfg --help
Description Use this command to enable or disable an inter-chassis link (ICL) on a Brocade DCX. The command
enables or disables the ICL by enabling or disabling the ports associated with the link. This
command is supported only on the Brocade DCX backbone.
Notes The execution of this command is subject to Admin Domain restrictions that may be in place. Refer
to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability"
for details.
This command must be executed on the active CP.
Operands The following operands are required:
slot
icl_group
--enable
--disable
--help
Examples To disable the ICL for ports 16-31:
To enable the ICL for ports 16-31:
Fabric OS Command Reference
53-1000599-02
Specifies the slot number of the ICL group to be enabled or disabled, followed
by a slash (/). The slot on the DCX can be either 5 or 8.
Specifies the ICL port group to be disabled or enabled. An ICL group
represents a range of ports. Specify 0 to enable or disable ports 0-15. Specify
1 to enable or disable ports 16-31.
Enables the ICL for the specified port group.
Disables the ICL for the specified port group.
Displays command usage.
switch:user> iclcfg --disable 8/1
switch:user> iclcfg --enable 8/1
2
iclCfg
271