Setup Screen Menu Selection Bar; Bios Setup Utility Screens - Intel P4000IP Series Service Manual

Key Option
+ Change Value
<F9> Setup Defaults
<F10> Save and Exit

Setup Screen Menu Selection Bar

The Setup Screen Menu selection bar is located at the top of the BIOS Setup Utility screen. It
displays tabs showing the major screen selections available to the user. By using the left and right
arrow keys, the user can select the listed screens. Some screen selections are out of the visible menu
space, and become available by scrolling to the left or right of the current selections displayed.

BIOS Setup Utility Screens

The following sections describe the screens available in the BIOS Setup utility for the configuration
of the server platform.
For each of these screens, there is an image of the screen with a list of Field Descriptions which
describe the contents of each item on the screen. Each item on the screen is hyperlinked to the
relevant Field Description. Each Field Description is hyperlinked back to the screen image.
These lists follow the following guidelines:

The text heading for each Field Description is the actual text as displayed on the BIOS Setup screen.
This screen text is a hyperlink to it's corresponding Field Description.

The text shown in the Option Values and Help Text entries in each Field Description are the actual text
and values are displayed on the BIOS Setup screens.

In the Option Values entries, the text for default values is shown with an underline. These values do not
appear underline on the BIOS Setup screen. The underlined text in this document is to serve as a
reference to which value is the default value.
®
Intel Server System P4000IP and Intel
The plus key on the keypad is used to change the value of the current menu item
to the next value. This key scrolls through the values in the associated pick list
without displaying the full list. On 106-key Japanese keyboards, the plus key has a
different scan code than the plus key on the other keyboards, but will have the
same effect.
Pressing the <F9> key causes the following to display:
Load Optimized Defaults?
If "Yes" is highlighted and <Enter> is pressed, all Setup fields are set to their
default values. If "No" is highlighted and <Enter> is pressed, or if the <Esc> key is
pressed, the user is returned to where they were before <F9> was pressed without
affecting any existing field values.
Pressing the <F10> key causes the following message to display:
Save configuration and reset?
If "Yes" is highlighted and <Enter> is pressed, all changes are saved and the Setup
is exited. If "No" is highlighted and <Enter> is pressed, or the <Esc> key is
pressed, the user is returned to where they were before <F10> was pressed
without affecting any existing values.
®
Workstation System P4000CR Service Guide
BIOS Setup Utilities
Description
Yes No
Yes No
89