Replacing The Front Control Panel Board; Removing The Front Control Panel; Figure 86. Removing Fp Assembly From Rack Handle; Figure 87. Disconnecting Control Panel Cable - Intel H2000WP Series Service Manual

Hardware Installations and Updates
5. Connect power cables and PMBus cable to upper PDB.
6. Close top cover and install power supply units.

Replacing the Front Control Panel board

Removing the Front Control Panel

1. Loosen and remove the four screws oat the back of handle. Be careful of the control panel cable
on the back.
2. Disconnect the cable from the control panel board.
3. Loosen and remove the two screws from the back of control panel board, so the board can
be removed.
50

Figure 86. Removing FP Assembly from Rack Handle

Figure 87. Disconnecting Control Panel Cable

®
Intel Server System H2000WP Family Service Guide