Monitoring Classifier Control Lists - Juniper POLICY MANAGEMENT - CONFIGURATION GUIDE V11.1.X Configuration Manual

JUNOSe 11.1.x Policy Management Configuration Guide
Table 31: show atm subinterface Output Fields (continued)
Related Topics

Monitoring Classifier Control Lists

Display a list of classifier control lists or details of classifier control lists.
Purpose
To display a list of CLACLs:
Action
host1#show classifier-list
GRE Tunnel greClass.1
VLAN lowLatencyLowDrop.1
VLAN excellentEffort.1
VLAN bestEffort.1
VLAN lowLatency.1
IP wstFd.1 source-route-class 44 destination-route-class 55 3 any any
IP XYZCorpPermit.1 local true color green ip any any
IP routeForXYZCorp.1 color red tcp any any
IP XYZCorpIcmpEchoRequests.1 ip any any
IP XYZCorpPrecedence.1 tcp any any tos 5
IP XYZCorpPrecedence67.1 udp any any
IPv6 IPv6Precedence.1 color yellow
IPv6 IPv6Precedence67.1
L2TP l2tpclass.1 color green user-packet-class 8
MPLS mplsClass.1 user-packet-class 10 exp-bits 3 exp-mask 7
Frame relay frMatchDeSet.7 user-packet-class 8 de-bit 0
To display details of each CLACL:
host1#show classifier-list detailed
IP Classifier Control List XYZCorpPermit
184
Monitoring Classifier Control Lists
Field Name
traffic-class
user packet class
show atm interface
Classifier Control List Table
---------- ------- ---- -----
Classifier Control List Table
---------- ------- ---- -----
Reference count: 1
Entry count: 1
Classifier-List XYZCorpPermit Entry 1
Color:
Protocol:
Not Protocol:
Source IP Address:
Source IP WildcardMask:
Not Source Ip Address:
Destination IP Address:
Field Description
Traffic class in the policy list
User packet class in the policy list
green
ip
false
0.0.0.0
255.255.255.255
false
0.0.0.0