Juniper POLICY MANAGEMENT - CONFIGURATION GUIDE V11.1.X Configuration Manual page 171

Junose software for broadband services routers policy management configuration guide
Table of Contents

Advertisement

Conformed Action: drop
Exceeded Action: drop
At I1, I2, I3, I4:
Classified Data Flow. DATA_RATE, Committed Rate: 5 Mbps
Peak Rate: 0 Mbps
Committed Action: transmit conditional
Conformed Action: drop
Exceeded Action: drop
All classified video flow policers over each VLAN interface feed into a single
policer with the following configuration:
VIDEO_AGG, Committed Rate: 1.5 Mbps
Peak Rate: 0 Mbps
Committed Action: transmit final
Conformed Action: drop
Exceeded Action: drop
All classified data flow policers over each Ethernet port feed into a single policer
with the following configuration:
DATA_AGG, Committed Rate: 10 Mbps
Peak Rate: 0 Mbps
Committed Action: transmit final
Conformed Action: drop
Exceeded Action: drop
Policy IP_POL1 is attached to I1, I2, I3, and I4
Example: Aggregate Rate Limit for All Nonvoice Traffic Hierarchical Policy Configuration
Chapter 7: Creating Hierarchical Policies for Interface Groups
145

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the POLICY MANAGEMENT - CONFIGURATION GUIDE V11.1.X and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

This manual is also suitable for:

E series

Table of Contents