Table of Contents
Advertisement
JUNOSe 11.1.x Policy Management Configuration Guide
To display component policies:
host 1#show policy-list comp_p1
IP Policy comp_p1
host1#show policy-list comp_p2
IP Policy comp_p2
To display component policies:
host1#show policy-list mpl_10
IP Policy mpl_10
206
Monitoring Policy Lists
Classifier control list: bestEffort, precedence 100
traffic-class bestEffort
Administrative state: enable
Reference count:
7
Classifier control list: C1, precedence 90
forward
Virtual-router: default
List:
next-hop 10.1.1.1, order 100, rule 2 (active)
Classifier control list: C2, precedence 10
filter
Referenced by interfaces:
ATM3/0.3
input policy, statistics enabled, virtual-router vr1
ATM3/0.4
output policy, statistics disabled, virtual-router vr1
ATM3/0.5
secondary-input policy, statistics enabled, virtual-router vr1
Referenced by profiles:
prof_1
input policy, statistics disabled
Referenced by merge policies:
mpl_10
mpl_11
mpl_12
Administrative state: enable
Reference count:
1
Classifier control list: C1, precedence 90
color red
Classifier control list: *, precedence 1000
filter
Referenced by interfaces:
ATM4/0.5
input policy, statistics enabled, virtual-router default
Referenced by profiles:
None
Referenced by merge policies:
None
Administrative state: enable
Reference count:
1
Classifier control list: C1, precedence 90
forward
Virtual-router: default
List:
next-hop 10.1.1.1, order 100, rule 2 (active)
next-hop 20.1.1.1, order 100, rule 3 (reachable)
Classifier control list: C2, precedence 10
filter
Policy Table
------ -----
Policy Table
------ -----
Policy Table
------ -----
Advertisement
Table of Contents
Need help?
Do you have a question about the POLICY MANAGEMENT - CONFIGURATION GUIDE V11.1.X and is the answer not in the manual?
Questions and answers