Juniper POLICY MANAGEMENT - CONFIGURATION GUIDE V11.1.X Configuration Manual page 137

Display interface statistics.
7.
host1#show ip interface atm 5/0.1
ATM5/0.1 line protocol Atm1483 is up, ip is up
Network Protocols: IP
Internet address is 99.99.99.2/255.255.255.0
Broadcast address is 255.255.255.255
Operational MTU = 9180
Operational speed = 155520000
Discontinuity Time = 721112
Router advertisement = disabled
Proxy Arp = disabled
Network Address Translation is disabled
TCP MSS Adjustment = disabled
Administrative debounce-time = disabled
Operational debounce-time
Access routing = disabled
Multipath mode = hashed
Auto Configure = disabled
Auto Detect = disabled
Inactivity Timer = disabled
In Received Packets 0, Bytes 0
Unicast Packets 0, Bytes 0
Multicast Packets 0, Bytes 0
In Policed Packets 0, Bytes 0
In Error Packets 0
In Invalid Source Address Packets 0
In Discarded Packets 0
Out Forwarded Packets 0, Bytes 0
Unicast Packets 0, Bytes 0
Multicast Routed Packets 0, Bytes 0
Out Scheduler Dropped Packets 0, Bytes 0
Out Policed Packets 0, Bytes 0
Out Discarded Packets 0
IP policy input mpl_5
classifier-group C2 entry 1
0 packets, 0 bytes
filter
classifier-group C3 entry 1
0 packets, 0 bytes
filter
classifier-group C1 entry 1
0 packets, 0 bytes
forward
classifier-group *
0 packets, 0 bytes
forward
queue 0: traffic class best-effort, bound to ip ATM5/0.1
Queue length 0 bytes
Forwarded packets 0, bytes 0
Dropped committed packets 0, bytes 0
Dropped conformed packets 0, bytes 0
Dropped exceeded packets 0, bytes 0
Attach IP policy p1 at atm 5/0.2 as output.
8.
host1(config)#interface atm 5/0.2
Administrative MTU = 0
Administrative speed = 0
= disabled
Merging Policies Configuration
Chapter 6: Merging Policies
111