Table of Contents
Advertisement
JUNOSe 11.1.x Policy Management Configuration Guide
Table 68: show secure policy-list Output Fields
Related Topics
Monitoring Information for Secure Policies
Display failure messages and information for secure policies. This command and the
Purpose
output are visible only to authorized users the mirror-enable command must be
enabled before using this command. All normal E Series system log messages are
suppressed for packet mirroring-related policy operations.
To display information for secure policies:
Action
host1# show mirror log
Time
Mirror-ID
-----------
-------------- ---------- --------------
TUE SEP 15
8976
2009 18:35:43 UTC
274
Monitoring Information for Secure Policies
Field Name
Policy
Administrative state
Reference count
Classifier control list
Mirror analyzer-ip-address
Analyzer-virtual-router
Analyzer-udp-port
Mirror-id
Session-id
Referenced by interface(s)
Referenced by profile(s)
Statistics
show secure policy-list
Session-ID
User
1923
123@abc.com
Field Description
Type (IP, IPv6, or L2TP) and name of the policy list
Status of administrative state, enable or disable; set
to enable when the policy list is created
Number of attachments to interfaces or profiles
Name of the classifier control list
IP address of analyzer device
Analyzer interface virtual router
UDP port used to communicate with analyzer device
Unique identifier of the mirrored session
Unique identifier of the user session
List of interfaces to which the policy is attached;
indicates whether the attachment is at secure input
or secure output of interface
Not currently supported: always null
Not currently supported: always disabled
Error Status
--------------
no secure policies available
Advertisement
Table of Contents
Need help?
Do you have a question about the POLICY MANAGEMENT - CONFIGURATION GUIDE V11.1.X and is the answer not in the manual?
Questions and answers