Juniper POLICY MANAGEMENT - CONFIGURATION GUIDE V11.1.X Configuration Manual page 107

Network Protocols: IP
Internet address is 2.2.2.2/255.255.255.255
Broadcast address is 255.255.255.255
Operational MTU = 0
Operational speed = 100000000
Discontinuity Time = 0
Router advertisement = disabled
Proxy Arp = disabled
Network Address Translation is disabled
TCP MSS Adjustment = disabled
Administrative debounce-time = disabled
Operational debounce-time
Access routing = disabled
Multipath mode = hashed
Auto Configure = disabled
Auto Detect = disabled
Inactivity Timer = disabled
In Received Packets 0, Bytes 0
Unicast Packets 0, Bytes 0
Multicast Packets 0, Bytes 0
In Policed Packets 0, Bytes 0
In Error Packets 0
In Invalid Source Address Packets 0
In Discarded Packets 0
Out Forwarded Packets 0, Bytes 0
Unicast Packets 0, Bytes 0
Multicast Routed Packets 0, Bytes 0
Out Scheduler Dropped Packets 0, Bytes 0
Out Policed Packets 0, Bytes 0
Out Discarded Packets 0
IP policy input P
classifier-group data entry 1
0 packets, 0 bytes
rate-limit-profile rlpData
committed rate: 10000 bps, committed burst: 125 bytes
peak Rate: 100000 bps, peak burst: 1875 bytes
committed: 0 packets, 0 bytes, action: transmit
conformed: 0 packets, 0 bytes, action: transmit
exceeded:
classifier-group voice entry 1
0 packets, 0 bytes
rate-limit-profile rlpVoice
committed rate: 64000 bps, committed burst: 100000 bytes
peak Rate: 100000 bps, peak burst: 1875 bytes
committed: 0 packets, 0 bytes, action: transmit
conformed: 0 packets, 0 bytes, action: transmit
exceeded:
classifier-group video entry 1
0 packets, 0 bytes
rate-limit-profile rlpVideo
committed rate: 70000 bps, committed burst: 875 bytes
peak Rate: 100000 bps, peak burst: 1875 bytes
committed: 0 packets, 0 bytes, action: transmit
conformed: 0 packets, 0 bytes, action: transmit
exceeded:
To configure a policy-parameter at an interface with the increase keyword:
Chapter 5: Creating Rate-Limit Profiles
Administrative MTU = 0
Administrative speed = 0
= disabled
0 packets, 0 bytes, action: drop
0 packets, 0 bytes, action: drop
0 packets, 0 bytes, action: drop
Creating Rate-Limit Profiles
81