Monitoring External Parent Groups - Juniper POLICY MANAGEMENT - CONFIGURATION GUIDE V11.1.X Configuration Manual

Table 40: show mpls l2transport interface Output Fields (continued)
Related Topics

Monitoring External Parent Groups

Display information about external parent groups.
Purpose
To display information about external parent groups:
Action
host1#show parent-group name EPG2
Parent Group EPG2
Field Name
Queue length
Forwarded packets, bytes
Dropped committed packets, bytes
Dropped conformed packets, bytes
Dropped exceeded packets, bytes
MPLS policy
classifier-group
rate-limit-profile
Committed
Conformed
Exceeded
show mpls
Reference count: 1
Rate limit profile: VLAN_RATE
Next parent group: EPG1 parameter C
Referenced by policies:
P1
Chapter 9: Monitoring Policy Management
Field Description
Number of bytes in queue
Total number of packets and bytes forwarded
by this interface
Total number of committed packets and bytes
dropped by this interface
Total number of conformed packets and bytes
dropped by this interface
Total number of exceeded packets and bytes
dropped by this interface
Type (input, output) and name of policy
Name of a CLACL attached to the interface and
number of entry
Name of profile
Number of packets and bytes conforming to the
committed access rate
Number of packets and bytes that exceed the
committed access rate but conform to the peak
access rate
Number of packets and bytes exceeding the
peak access rate
Parent Group Table
------ ----- ------
Monitoring External Parent Groups
203