Table of Contents
Advertisement
Reference count:
2
Classifier control list: *
mirror analyzer-ip-address 192.168.99.2 analyzer-virtual-router default
analyzer-udp-port 6500 mirror-id 1 session-id 1
Referenced by interface(s):
TUNNEL l2tp:5/1/5
secure-input policy
TUNNEL l2tp:5/1/5
secure-output policy
Secure IP Policy secure-ipv4-policy
Administrative state: enable
Reference count:
6
Classifier control list: *
mirror analyzer-ip-address 19.0.0.2 analyzer-virtual-router default
analyzer-udp-port 2500 mirror-identifier 1 session-identifier 1
Referenced by interface(s):
ip100.1.1.3
secure-input policy, statistics disabled, virtual-router
default
ip100.1.1.3
secure-output policy, statistics disabled, virtual-router
default
Example: Configuring CLI-Based User-Specific Mirroring
Chapter 11: Configuring CLI-Based Packet Mirroring
237
Advertisement
Table of Contents
Need help?
Do you have a question about the POLICY MANAGEMENT - CONFIGURATION GUIDE V11.1.X and is the answer not in the manual?
Questions and answers