Juniper POLICY MANAGEMENT - CONFIGURATION GUIDE V11.1.X Configuration Manual page 212

JUNOSe 11.1.x Policy Management Configuration Guide
Table 32: show classifier-list Output Fields (continued)
186
Monitoring Classifier Control Lists
Field Name
Color
Protocol
Not Protocol
Source IP Address
Source IP WildcardMask
Not Source Ip Address
Destination IP Address
Destination IP WildcardMask
Not Destination Ip Address
Traffic Class
User Packet Class
DS Field
TOS Byte
Precedence
User Priority bits
Traffic Class Field
EXP Bits
EXP Mask
DE Bit
Destination Route Class
Source Route Class
Field Description
Packet color to match: green, yellow, or red
Protocol type
If true, matches any protocol except the
preceding protocol; if false, matches the
preceding protocol
Address of the network or host from which the
packet is sent
Mask that indicates addresses to be matched
when specific bits are set
If true, matches any source IP address and mask
except the preceding source IP address and
mask; if false, matches the preceding source IP
address and mask
Number of the network or host from which the
packet is sent
Mask that indicates addresses to be matched
when specific bits are set
If true, matches any destination IP address and
mask except the preceding destination IP
address and mask; if false, matches the
preceding destination IP address and mask
Name of the traffic class to match
User packet value to match
DS field value to match
ToS value to match
Precedence value to match
User priority bits value to match
Traffic class field value to match
MPLS EXP bit value to match
Mask applied to EXP bits before matching
Frame Relay DE bit value to match
Route class used to classify packets based on
the packet's destination address
Route class used to classify packets based on
the packet's source address