Table of Contents
Advertisement
Table 38: show ip interfaces Output Fields (continued)
Related Topics
Monitoring the Policy Configuration of IPv6 Interfaces
Display detailed or summary information, including policy and classifier information,
Purpose
for a particular IPv6 interface or for all interfaces. The default for the show ipv6
interface command is all interface types and all interfaces. The brief or detail
keywords with the show ipv6 interface command displays different levels of
information.
To display information about IPv6 policy lists:
Action
host1#show ipv6 interface FastEthernet 9/0.6
FastEthernet9/0.6 line protocol VlanSub is up, ipv6 is up
Field Name
rate-limit-profile
committed
conformed
exceeded
action
show ip interface
Description: IPv6 interface in Virtual Router Hop6
Network Protocols: IPv6
Link local address: fe80::90:1a00:740:31cd
Internet address: 2001:db8:1::/48
Operational MTU 1500 Administrative MTU 0
Operational speed 100000000 Administrative speed 0
Creation type Static
ND reachable time is 3600000 milliseconds
ND duplicate address detection attempts is 100
ND neighbor solicitation retransmission interval is 1000 milliseconds
ND proxy is enabled
ND RA source link layer is advertised
ND RA interval is 200 seconds, lifetime is 1800 seconds
ND RA managed flag is disabled, other config flag is disabled
ND RA advertising prefixes configured on interface
In Received Packets 0, Bytes 0
Unicast Packets 0, Bytes 0
Multicast Packets 0, Bytes 0
In Total Dropped Packets 0, Bytes 0
In Policed Packets 0
Chapter 9: Monitoring Policy Management
Field Description
Name of the rate-limit profile
Number of packets and bytes within the
committed rate limit
Number of packets and bytes exceeding the
committed rate limit but within the peak rate
Number of packets and bytes exceeding the
peak rate
Action performed on the packets matched by
the rules in the rate-limit profile
Monitoring the Policy Configuration of IPv6 Interfaces
197
Advertisement
Table of Contents
Need help?
Do you have a question about the POLICY MANAGEMENT - CONFIGURATION GUIDE V11.1.X and is the answer not in the manual?
Questions and answers