Table 70: Show Snmp Trap Output Fields - Juniper POLICY MANAGEMENT - CONFIGURATION GUIDE V11.1.X Configuration Manual

JUNOSe 11.1.x Policy Management Configuration Guide
Table 70 on page 276 lists the show snmp trap command output fields.
Meaning

Table 70: show snmp trap Output Fields

Related Topics
276
Monitoring SNMP Secure Packet Mirroring Traps
Field Name
Enabled Categories
SNMP authentication failure trap
Trap Source
Trap Source Address
Trap Proxy
Secure Trap Logging
Global Trap Severity Level
Address
Security String
Ver
Port
Trap Categories
TrapSeverityFilter
Ping TimeOut
Maximum QueueSize
Queue DrainRate
Queue Full discrd methd
dropFirstIn
dropLastIn
mirror trap-enable
snmp-server enable traps
snmp-server host
Field Description
Trap categories that are enabled on the router
Enabled or disabled
Interface whose IP address is used as the source
address for all SNMP traps
IP address used as the source address for all SNMP
traps
Enabled or disabled
Enabled or disabled
Global severity level filter; if a trap does not meet this
severity level, it is discarded
IP address of the trap recipient
Name of the SNMP community
SNMP version (v1 or v2) of the SNMP trap packet
UDP port on which the trap recipient accepts traps
Types of traps that the trap recipient can receive
Severity level filter for this SNMP host
Configured ping timeout in minutes
Maximum number of traps to be kept in the trap queue
Maximum number of traps per second to be sent to
the host
Method used to discard traps when the queue is full:
Oldest trap in the queue is dropped
Most recent trap is dropped