Monitoring Snmp Secure Audit Logs - Juniper POLICY MANAGEMENT - CONFIGURATION GUIDE V11.1.X Configuration Manual

NOTE: Secure packet-mirroring trap configuration information appears in the Enabled
Categories and Trap Categories fields only if the mirror-enable command is enabled.

Monitoring SNMP Secure Audit Logs

Display output when the secure audit log data is available.
Purpose
To display the contents of the SNMP secure audit log:
Action
host1# show snmp secure-log
Agent's Context
---------------
SnmpRouterAgent1
reqId=3, errSts=0, errIndx=0, msgID=2, msgMaxSize=1500, msgFlags=0,
msgSecurityModel=3,
contextEngineID=80:00:13:0a:05:00:90:1a:41:45:51:80:00:00:01 ,
securityName=jbond, engineBoots=0, engineTime=0, varCnt=13, Vars:
1.3.6.1.2.1.1.3.0 [1259], 1.3.6.1.6.3.1.1.4.1.0
1],3.6.1.4.1.4874.2.2.77.3.0.3], 1.3.6.1.4.1.4874.2.2.77.3.1.13 [?^K^B
1.3.6.1.4.1.4874.2.2.77.3.1.5 [0], 1.3.6.1.4.1.4874.2.2.77.3.1.4 [0],
1.3.6.1.4.1.4874.2.2.77.3.1.3 [f], 1.3.6.1.4.1.4874.2.2.77.3.1.14 [1],
1.3.6.1.4.1.4874.2.2.77.3.1.1 [1], 1.3.6.1.4.1.4874.2.2.77.3.1.2 [1],
1.3.6.1.4.1.4874.2.2.77.3.1.11 [f], 1.3.6.1.4.1.4874.2.2.77.3.1.12 [1],
1.3.6.1.4.1.4874.2.2.77.3.1.15 [0], 1.3.6.1.4.1.4874.2.2.16.1.3.5.0 [5],
SnmpRouterAgent44
reqId=5, errSts=0, errIndx=0, msgID=4, msgMaxSize=1500, msgFlags=0,
msgSecurityModel=3,
contextEngineID=80:00:13:0a:05:00:90:1a:41:45:51:80:00:00:01 ,
securityName=jbond, engineBoots=0, engineTime=0, varCnt=14, Vars:
1.3.6.1.2.1.1.3.0 [1259], 1.3.6.1.6.3.1.1.4.1.0
1],3.6.1.4.1.4874.2.2.77.3.0.1], 1.3.6.1.4.1.4874.2.2.77.3.1.13 [?^K^B
1.3.6.1.4.1.4874.2.2.77.3.1.5 [0], 1.3.6.1.4.1.4874.2.2.77.3.1.4 [0],
1.3.6.1.4.1.4874.2.2.77.3.1.3 [f], 1.3.6.1.4.1.4874.2.2.77.3.1.14 [1],
1.3.6.1.4.1.4874.2.2.77.3.1.10 [f], 1.3.6.1.4.1.4874.2.2.77.3.1.1 [1],
1.3.6.1.4.1.4874.2.2.77.3.1.2 [1], 1.3.6.1.4.1.4874.2.2.77.3.1.6 [0],
1.3.6.1.4.1.4874.2.2.77.3.1.8 [0], 1.3.6.1.4.1.4874.2.2.77.3.1.7 [f],
1.3.6.1.4.1.4874.2.2.16.1.3.5.0 [3],
SnmpRouterAgent22
reqId=8, errSts=0, errIndx=0, msgID=7, msgMaxSize=1500, msgFlags=3,
msgSecurityModel=3,
contextEngineID=80:00:13:0a:05:00:90:1a:41:45:51:80:00:00:01 ,
securityName=jbond, engineBoots=1, engineTime=8602, varCnt=6, Vars:
1.3.6.1.2.1.1.3.0 [1259], 1.3.6.1.6.3.1.1.4.1.0
1],3.6.1.4.1.4874.2.2.77.3.0.4], 1.3.6.1.4.1.4874.2.2.77.3.1.13 [?^K^B
1.3.6.1.4.1.4874.2.2.77.3.1.9 [192.168.7.120], 1.3.6.1.4.1.4874.2.2.77.3.1.14
[1], 1.3.6.1.4.1.4874.2.2.16.1.3.5.0 [4],
Table 71 on page 278 lists the show snmp secure-log command output fields.
Meaning
snmp-server secure-log
show mirror trap
show snmp trap
LogData
---------------------------------------------------------
SNMP Trap, SNMPVer= 3, src=10.27.120.117, dest=10.1.1.1,
SNMP Trap, SNMPVer= 3, src=10.27.120.117, dest=10.1.1.1,
SNMP Trap, SNMPVer= 3, src=10.27.120.117, dest=10.1.1.1,
Chapter 14: Monitoring Packet Mirroring
Monitoring SNMP Secure Audit Logs
277