Juniper POLICY MANAGEMENT - CONFIGURATION GUIDE V11.1.X Configuration Manual page 226

JUNOSe 11.1.x Policy Management Configuration Guide
Table 39: show ipv6 interface Output Fields (continued)
200
Monitoring the Policy Configuration of IPv6 Interfaces
Field Name
Multicast Packets, Bytes
In Total Dropped Packets, Bytes
In Policed Packets
In Invalid Source Address Packets
In Error Packets
In Discarded Packets
Out Forwarded Packets, Bytes
Unicast Packets, Bytes
Multicast Routed Packets, Bytes
Out Total Dropped Packets
Out Scheduler Dropped Packets, Bytes
Out Policed Packets, Bytes
Out Discarded Packets
IPv6 policy
rate-limit-profile
classifier-group entry
Committed
Field Description
Number of multicast packets and bytes received
on the IPv6 interface, which are then
multicast-routed and counted as multicast
packets
Total number of inbound packets and bytes
dropped on this interface
Number of packets that were received and
dropped because of rate limits
Number of packets received with invalid source
address (for example, spoofed packets)
Number of packets received with errors
Number of packets received that were discarded
for reasons other than rate limits, errors, and
invalid source address
Total number of packets and bytes that were
sent from this interface
Number of unicast packets and bytes that were
sent from this interface
Number of multicast packets and bytes that were
sent from this interface
Total number of outbound packets and bytes
dropped by this interface
Number of outbound packets and bytes dropped
by the scheduler
Number of outbound packets and bytes dropped
because of rate limits
Number of outbound packets that were
discarded for reasons other than those dropped
by the scheduler and those dropped because of
rate limits
Type (input, output, local-input) and name of
the policy
Name of the profile
Entry index
Number of packets and bytes that conform to
the committed access rate