Monitoring Qos Configurations For Ethernet - Juniper JUNOSE 11.1.X - QUALITY OF SERVICE CONFIGURATION GUIDE 3-21-2010 Configuration Manual

For e series broadband services routers - quality of service configuration
Table of Contents

Advertisement

JUNOSe 11.1.x Quality of Service Configuration Guide
Related Topics

Monitoring QoS Configurations for Ethernet

To monitor Ethernet configurations for QoS:
182
Monitoring QoS Configurations for Ethernet
qos profile
------------------------ ------- --------- ----- ------- --------- --------
test@GigabitEthernet6/0/0.100
For information about bulk-configured VLAN subinterfaces, see JUNOSe Link
Layer Configuration Guide
For information about service profiles, see JUNOSe Broadband Access Configuration
Guide
For information about RADIUS VSAs, see JUNOSe Broadband Access Configuration
Guide
auto-configure vlan
encapsulation vlan
interface gigabitEthernet
ip service-profile
profile
profile vlan bulk-config
vlan auto-configure
vlan bulk-config
vlan profile
vlan service-profile
show ip interface
show ip route
show qos interface-hierarchy
Monitoring the QoS Configuration of Fast Ethernet, Gigabit Ethernet, and
10-Gigabit Ethernet Interfaces on page 347
Monitoring the QoS Configuration of IP Interfaces on page 345
Monitoring the QoS Profiles Attached to an Interface on page 339
Monitoring the Configuration of QoS Port-Type Profiles on page 340
Monitoring the Configuration of QoS Profiles on page 341
Monitoring the QoS Scheduler Hierarchy on page 322
Monitoring Shared Shapers on page 329
group
type
type
class
vlan
node
profile
profile
default
default

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.1.x

Table of Contents