Attaching A Qos Profile To An Interface Set; Deleting An Interface Superset Or An Interface Set - Juniper JUNOSE 11.1.X - QUALITY OF SERVICE CONFIGURATION GUIDE 3-21-2010 Configuration Manual

2.

Attaching a QoS Profile to an Interface Set

To attach a QoS profile to an interface set:
1.
2.
Related Topics

Deleting an Interface Superset or an Interface Set

You can delete an interface superset or an interface set after configuration.
Tasks to delete an interface superset or an interface set include:
Deleting an Interface Superset
You must remove the interface sets from an interface superset before you can delete
the interface superset. If the interface superset has a QoS profile attached or a QoS
parameter instance, all of these attachments are also deleted.
To delete an interface superset:
1.
Attach the QoS profile.
host1(config-qos-interface-superset)#qos-profile business-data
Specify the QoS interface set.
host1(config)#qos-interface-superset vlan-set
Attach the QoS profile.
host1(config-qos-interface-set)#qos-profile business-data
Monitoring the QoS Profiles Attached to an Interface on page 339
Monitoring the QoS Scheduler Hierarchy on page 322
Monitoring Shared Shapers on page 329
node
qos-interface-set
qos-interface-superset
qos-profile
queue
Deleting an Interface Superset on page 219
Deleting an Interface Set on page 220
Remove the interface sets from the interface superset.
host1(config)#qos-interface-superset business-data
host1(config-qos-interface-superset)#no qos-interface-set atm-vc-data
Chapter 23: Configuring Interface Sets for QoS
Attaching a QoS Profile to an Interface Set
219