Table 51: Show Interfaces Output Fields - Juniper JUNOSE 11.1.X - QUALITY OF SERVICE CONFIGURATION GUIDE 3-21-2010 Configuration Manual

For e series broadband services routers - quality of service configuration
Table of Contents

Advertisement

JUNOSe 11.1.x Quality of Service Configuration Guide

Table 51: show interfaces Output Fields

Related Topics
348
Monitoring the QoS Configuration of Fast Ethernet, Gigabit Ethernet, and 10-Gigabit Ethernet Interfaces
Field Name
Administrative qos-shaping-mode
Operational qos-shaping-mode
Attached QoS profile
Configuring the QoS Shaping Mode for Ethernet Interfaces on page 179
Creating Parameter Instances
For more information about other fields displayed with this , see JUNOSe Physical
Layer Configuration Guide
show interfaces
Field Description
Configured shaping mode for the interface:
disabled Shaping mode is configured but
disabled.
frame Default shaping mode for shaping and
policing rates. Reports QoS statistics such as
transmitted bytes and dropped bytes based on
bytes within frames.
cell Shaping mode for shaping and policing
rates is cell-based; resulting traffic stream
conforms exactly to the policing rates configured
in downstream devices. Reports statistics in
bytes within cells and also accounts for cell
encapsulation and padding overhead.
none Shaping mode is not configured.
Actual shaping mode for the interface. The router
determines the operational shaping mode based on
the value configured using the
command. For more information, see "QoS Shaping
Mode for Ethernet Interfaces Overview" on page 178.
disabled Shaping mode is configured but
disabled.
frame Default shaping mode for shaping and
policing rates. Reports QoS statistics such as
transmitted bytes and dropped bytes based on
bytes within frames.
cell Shaping mode for shaping and policing
rates is cell-based; resulting traffic stream
conforms exactly to the policing rates configured
in downstream devices. Reports statistics in
bytes within cells and also accounts for cell
encapsulation and padding overhead.
none Shaping mode is not configured.
QoS profile attachment at or below the displayed
interface. For example, if the interface being
displayed is a VLAN subinterface, and the attachment
is at the Gigabit Ethernet interface, the Gigabit
Ethernet attachment is displayed.
qos-shaping-mode

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.1.x

Table of Contents