JUNOSe 11.1.x Quality of Service Configuration Guide
host1#show egress-queue events tunnel-server 6/0
To display events for queues only on the specified interface and not stacked above
the interface:
host1#show egress-queue events gigabitEthernet 1/0 explicit
To display the sum of events for the queues bound to interfaces that are stacked
above the specified interface:
host1#show egress-queue events gigabitEthernet 1/0 summary
To display events for queues belonging to a specific traffic class:
host1#show egress-queue events gigabitEthernet 1/0 traffic-class voice
To filter output based on the number of events that exceed the specified value.
host1#show egress-queue events gigabitEthernet 1/0 event-exceeding committed
host1#show egress-queue events gigabitEthernet 1/0 event-exceeding conformed
host1#show egress-queue events gigabitEthernet 1/0 event-exceeding exceeded
host1#show egress-queue events gigabitEthernet 1/0 event-exceeding forwarded
Table 43 on page 332 lists the show egress-queue events command output fields.
Meaning
Table 43: show egress-queue events Output Fields
Related Topics
332
Monitoring Forwarding and Drop Events on the Egress Queue
Field Name
interface
traffic class
forwarded events
committed drop events
conformed drop events
exceeded drop events
rate period count
Configuring Event Statistics on page 40
show egress-queue events
Field Description
Name of the interface
Name of the traffic class
Number of forwarded rate events
Number of committed drop events
Number of conformed drop events
Number of exceeded drop events
Time frame during which events are counted
(in seconds)