Table 57: Show Qos-Parameter-Define Output Fields; Monitoring Qos Parameter Definitions - Juniper JUNOSE 11.1.X - QUALITY OF SERVICE CONFIGURATION GUIDE 3-21-2010 Configuration Manual

Monitoring QoS Parameter Definitions

Display the QoS parameter definition settings for QoS administrators.
Purpose
To display the settings for a specific QoS parameter definition:
Action
host1#show qos-parameter-define ip-multicast
------------ ---------- --------- ---------- ------
ip-multicast ip
------------ -------------------------------------
ip-multicast ip-multicast-adjustment, hierarchical
To display information about QoS parameter definitions in condensed format:
host1#show qos-parameter-define voice1 brief
To display references to all QoS parameter definitions:
host1#show qos-parameter-define references
Table 57 on page 355 lists the show qos-parameter-define command output fields.
Meaning

Table 57: show qos-parameter-define Output Fields

Related Topics
controlled instance
parameter interface interface interface
name types
ip, ipv6
parameter
name
Field Name
parameter name
controlled interface types
instance interface types
subscriber interface types
value range
properties
Configuring a Basic Parameter Definition for QoS Administrators on page 238
show qos-parameter-define
Chapter 31: Monitoring QoS on E Series Routers
subscriber
value
types types range
<none> <none>
properties
Field Description
Name of the parameter definition
Types of controlled-interface types that are available
for the parameter definition
Types of instance-interface types that are available
for the parameter definition
Types of subscriber-interface types that are available
for the parameter definition
Range assigned to the parameter definition
Applications and hierarchical settings assigned to the
parameter definition
Monitoring QoS Parameter Definitions
355