Juniper JUNOSE 11.1.X - QUALITY OF SERVICE CONFIGURATION GUIDE 3-21-2010 Configuration Manual page 323

For e series broadband services routers - quality of service configuration
Table of Contents

Advertisement

Chapter 28: Configuring the Shaping Mode for Ethernet with QoS Parameters
! Configure the byte adjustment for VLAN1 and VLAN2.
interface gigabitEthernet 6/0/0
encapsulation vlan
interface gigabitEthernet 6/0/0.1
vlan id 1
qos-parameter byte-adjustment -28
qos-parameter cell-mode 1
qos-profile vc1
interface gigabitEthernet 6/0/1.1
vlan id 2
qos-parameter byte-adjustment -2
qos-parameter cell-mode 1
qos-profile vc2
Cell Shaping Mode Using QoS Parameters Overview on page 281
Related Topics
291
Example: QoS Parameter Configuration for QoS Cell Mode and Byte Adjustment for Cell Shaping

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.1.x

Table of Contents