Figure 15: Sample Strict-Priority Scheduling Hierarchy - Juniper JUNOSE 11.1.X - QUALITY OF SERVICE CONFIGURATION GUIDE 3-21-2010 Configuration Manual

5.
This configuration creates the hierarchy shown in Figure 15 on page 67.

Figure 15: Sample Strict-Priority Scheduling Hierarchy

Related Topics
host1(config-qos-profile)#atm group default
host1(config-qos-profile)#atm group Strict-priority scheduler-profile
strictPriorityBandwidth
host1(config-qos-profile)#atm-vc node group default
host1(config-qos-profile)#atm-vc node group Strict-priority
host1(config-qos-profile)#atm-vc queue traffic-class best-effort
host1(config-qos-profile)#atm-vc queue traffic-class Low-loss-1
host1(config-qos-profile)#atm-vc queue traffic-class Low-latency-1
host1(config-qos-profile)#atm-vc queue traffic-class Low-latency-2
host1(config-qos-profile)#exit
Attach the QoS profile to an interface.
host1(config)#interface atm 2/0
host1(config-if)#qos-profile Example-qos-profile
host1(config-if)#exit
host1(config)#
Strict-Priority and Relative Strict-Priority Scheduling Overview on page 59
For more information about specifying an expression that you can reference
within a scheduler profile, see Using Expressions for Bandwidth and Burst Values
in a Scheduler Profile on page 48
group
node
qos-profile
queue
scheduler-profile
shaping-rate
Chapter 8: Configuring Strict-Priority Scheduling
Configuring Strict-Priority Scheduling
67