Creating A Qos Parameter Instance For An Interface Superset; Creating A Qos Parameter Instance For An Interface Set - Juniper JUNOSE 11.1.X - QUALITY OF SERVICE CONFIGURATION GUIDE 3-21-2010 Configuration Manual

3.

Creating a QoS Parameter Instance for an Interface Superset

To create a QoS parameter instance for an interface superset:
1.
2.
3.

Creating a QoS Parameter Instance for an Interface Set

To create a QoS parameter instance for an interface set:
1.
2.
3.
Related Topics
Configure the instance-interface type and specify the interface set or the interface
superset.
host1(config-qos-parameter-define)#instance-interface-type set
host1(config-qos-parameter-define)#instance-interface-type superset
You can specify up to eight instance-interface types for each parameter definition.
Specify the QoS interface superset.
host1(config)#qos-interface-superset vlan-superset
Create the QoS parameter instance.
host1(config-qos-interface-superset)#qos-parameter business-data
Attach the QoS profile.
host1(config-qos-interface-superset)#qos-profile vlan
Specify the QoS interface set.
host1(config)#qos-interface-set vlan-set
Create the QoS parameter instance.
host1(config-qos-interface-set)#qos-parameter business-data
Attach the QoS profile.
host1(config-qos-interface-set)#qos-profile vlan
Monitoring the QoS Profiles Attached to an Interface on page 339
Monitoring the QoS Scheduler Hierarchy on page 322
Monitoring Shared Shapers on page 329
controlled-interface-type
instance-interface-type
qos-interface-set
qos-interface-superset
Creating a QoS Parameter Instance for an Interface Superset
Chapter 23: Configuring Interface Sets for QoS
217