Juniper JUNOSE 11.1.X - QUALITY OF SERVICE CONFIGURATION GUIDE 3-21-2010 Configuration Manual page 153

Chapter 13: Configuring Implicit and Explicit Constituent Selection for Shaping
You can optionally set a value that determines the precedence of a constituent
among its peers (strict or weighted) for claiming bandwidth.
For strict-priority constituents, the priority range is 1–8 and the default value is
8. A lower value correlates to a higher claim.
For weighted constituents, the range is 1–31 and the default value is 8. The
weights of all sibling weighted constituents are added together. Then each
weighted constituent is allocated bandwidth according to the proportion of its
weight to the total.
Constituent Selection for Shared Shaping Overview on page 107
Related Topics
Explicit Constituent Selection Overview on page 115
scheduler-profile
shared-shaping-constituent
shared-shaping-rate
121
Configuring Explicit Constituents for Simple or Compound Shared Shaping