Table 41: Show Qos Shared-Shaper Output Fields; Monitoring Shared Shaper Algorithm Variables - Juniper JUNOSE 11.1.X - QUALITY OF SERVICE CONFIGURATION GUIDE 3-21-2010 Configuration Manual

JUNOSe 11.1.x Quality of Service Configuration Guide
host1#show qos shared-shaper qos-interface-superset allservices
Table 41 on page 330 lists the show qos shared-shaper command output fields.
Meaning

Table 41: show qos shared-shaper Output Fields

Related Topics

Monitoring Shared Shaper Algorithm Variables

Display information about the user-configurable variables for controlling the simple
Purpose
shared shaper algorithm.
To display information about all variables:
Action
host1#show qos-shared-shaper-control
330
Monitoring Shared Shaper Algorithm Variables
Field Name
interface
resource
shared shaping rate
shaping rate
other
Total shared shapers
Total constituents
Total number of shared shapers
that are disabled (in failover
mode) due to lack of resources
Compound shared shapers are
[not] supported
Configuring a Scheduler Hierarchy on page 47
Configuring Simple Shared Shaping on page 81
Configuring Compound Shared Shaping on page 100
Configuring Interface Sets for QoS on page 213
Configuring Interface Supersets for QoS on page 212
show qos shared-shaper
control
Field Description
Type of interface
Traffic resource associated with the logical interface
Configured shared-shaping rate in bits per second
Individual shaping rate of a traffic resource in bits
per second
Actual current shaping rate in bits per second
Total number of shared shapers
Total number of resource constituents for all shared
shapers
Total number of shared shapers that are disabled (in
failover mode) due to lack of resources
Indication of whether compound shared shapers are
supported; determined by installed hardware