Table 31: Byte Adjustment Values For Frame And Cell Shaping Modes; Guidelines For Configuring Byte Adjustment Of Cell And Frame Shaping Rates Using Qos Parameters - Juniper JUNOSE 11.1.X - QUALITY OF SERVICE CONFIGURATION GUIDE 3-21-2010 Configuration Manual

JUNOSe 11.1.x Quality of Service Configuration Guide

Table 31: Byte Adjustment Values for Frame and Cell Shaping Modes

Related Topics
Guidelines for Configuring Byte Adjustment of Cell and Frame Shaping Rates Using
QoS Parameters
When you specify the cell or frame byte-adjustment application, the following
considerations apply:
296

Guidelines for Configuring Byte Adjustment of Cell and Frame Shaping Rates Using QoS Parameters

Configured
Shaping Mode qos-frame-byte-adjustment
on Port 0 Value
Cell Any value
Cell Any value
Frame Undefined
Frame 8
Frame Undefined
Configuring a Parameter Definition to Adjust Cell Shaping Rates for ADSL Traffic
on page 297
Configuring a Parameter Definition to Adjust Frame Shaping Rates for VDSL
Traffic on page 299
Example: QoS Parameter Configuration for QoS Cell Mode and Byte Adjustment
for Cell Shaping on page 286
For more information about configuring shaping modes for Ethernet, see QoS
Shaping Mode for Ethernet Interfaces Overview on page 178 and Cell Shaping
Mode Using QoS Parameters Overview on page 281
For more information about shaping the downstream rate using QoS parameter
instances that were created dynamically by ANCP, see QoS Downstream Rate
Application Overview on page 301
You can have only one QoS parameter definition with the cell byte-adjustment
application (qos-byte-adjustment) configured.
You can only have one QoS parameter definition with the frame byte-adjustment
application (qos-frame-byte-adjustment) configured.
You can specify only instance-interface types of lag, ethernet, svlan, and vlan.
You can specify only an subscriber-interface type of vlan.
The available range for parameters with the byte adjustment application is -32–63.
You cannot configure another range using the range command.
Configured Final Byte
qos-byte-adjustment Adjustment
Value Value
-4 -4
Undefined 0
Undefined 0
-4 8
8 8