Juniper JUNOSE 11.1.X - QUALITY OF SERVICE CONFIGURATION GUIDE 3-21-2010 Configuration Manual page 342

JUNOSe 11.1.x Quality of Service Configuration Guide
Related Topics
310
Example: QoS Parameter Configuration for QoS Downstream Rate
controlled-interface-type ip
instance-interface-type vlan
instance-interface-type ethernet
exit
! Enable QoS adaptive mode for ANCP.
l2c
qos-adaptive-mode
exit
! Configure the vlan1 and vlan2 scheduler profiles.
scheduler-profile vlan1
shared-shaping-rate ancpVlan burst 10 milliseconds auto
exit
scheduler-profile voice
shaping-rate 100000 burst 10 milliseconds
exit
scheduler-profile video
shaping-rate 8000000 burst 10 milliseconds
exit
scheduler-profile vlan2
shaping-rate ancpVlan burst 10 milliseconds
exit
! Add the scheduler profiles to the vlan1 and vlan2 QoS profiles.
qos-profile vlan1
vlan node scheduler-profile vlan1
vlan queue traffic-class voice scheduler-profile voice
vlan queue traffic-class video scheduler-profile video
exit
qos-profile vlan2
vlan node scheduler-profile vlan2
exit
! Configure the QoS downstream rate adjustment for VLAN1 and VLAN2.
interface gigabitEthernet 6/0/0
encapsulation vlan
interface gigabitEthernet 6/0/1.1
vlan id 1
qos-profile vlan1
exit
interface gigabitEthernet 6/0/1.1
vlan id 2
qos-profile vlan2
exit
QoS Downstream Rate Application Overview on page 301