JUNOSe 11.1.x Quality of Service Configuration Guide
To display information about all scheduler profiles:
Action
host1#show scheduler-profile
scheduler
---------
default
wf100
spSV25
videoHar
To display the number of times that a QoS profile references the scheduler profile:
host1#show scheduler-profile brief
scheduler-profile default referenced 39 times in qos-profiles
scheduler-profile wf100 referenced 1 time in qos-profiles
scheduler-profile spSV25 referenced 2 times in qos-profiles
To display a list of QoS profiles that reference the scheduler profile:
host1#show scheduler-profile references
scheduler-profile default
scheduler-profile wf100
scheduler-profile spSV25
Table 40 on page 328 lists the show scheduler-profile command output fields.
Meaning
Table 40: show scheduler-profile Output Fields
328
Monitoring the Configuration of Scheduler Profiles
shaping
rate
burst
-------
-----
<none>
32767
128000
32767
5000000
32767
<none>
32767
Referenced by QoS profiles:
atm-default
serial-default
ethernet-default
server-default
Referenced by QoS profiles:
ipV610
Referenced by QoS profiles:
qospro25
Field Name
scheduler
shaping rate
burst
weight
strict priority
assured rate
Referenced by QoS profiles
strict
weight
priority
assured rate
------
--------
------------
8
no
<none>
20
no
75000
40
no
64000
8
no
hierarchical
Field Description
Name of the scheduler profile
Maximum bandwidth, in bits per second, provided
to a node or queue
Catch-up number associated with the shaper
HRR weight of a node or queue
Status of strict priority, yes or no
Desired bandwidth, in bits per second, provided to
a node or queue, or the keyword, hierarchical, to
indicate that HAR is used
QoS profiles that reference this profile