Monitoring Qos Configurations For Ethernet - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - QUALITY OF SERVICE CONFIGURATION GUIDE 2010-09-22 Configuration Manual

JunosE 11.3.x Quality of Service Configuration Guide
Related
Documentation

Monitoring QoS Configurations for Ethernet

174
host1:server#show qos interface-hierarchy interface gigabitEthernet
6/0/0.100
attachment@ ip GigabitEthernet6/0/0.100:
qos profile
------------------------ ------- --------- ----- ------- --------- --------
test@GigabitEthernet6/0/0.100
For information about bulk-configured VLAN subinterfaces, see JunosE Link Layer
Configuration Guide
For information about service profiles, see JunosE Broadband Access Configuration
Guide
For information about RADIUS VSAs, see JunosE Broadband Access Configuration Guide
auto-configure vlan
encapsulation vlan
interface gigabitEthernet
ip service-profile
profile
profile vlan bulk-config
vlan auto-configure
vlan bulk-config
vlan profile
vlan service-profile
show ip interface
show ip route
show qos interface-hierarchy
To monitor Ethernet configurations for QoS:
Monitoring the QoS Configuration of Fast Ethernet, Gigabit Ethernet, and 10-Gigabit
Ethernet Interfaces on page 328
Monitoring the QoS Configuration of IP Interfaces on page 326
Monitoring the QoS Profiles Attached to an Interface on page 320
Monitoring the Configuration of QoS Port-Type Profiles on page 321
Monitoring the Configuration of QoS Profiles on page 321
Monitoring the QoS Scheduler Hierarchy on page 303
Monitoring Shared Shapers on page 310
t-class interface rule
group type type
vlan node default default
Copyright © 2010, Juniper Networks, Inc.
traffic scheduler queue
class profile profile