JUNOSe 11.1.x Quality of Service Configuration Guide
7.
8.
9.
10.
In this example, the constituents of the VP shared shaper are the VP 1 default group
node, the VP 1 Group EF node, and the VP 1 Group AF node. The available bandwidth
is strictly allocated in the following order:
1.
2.
3.
Related Topics
106
Example: Compound Shared Shaping for ATM VPs
Create VP nodes for each group and for traffic in the default group. The scheduler
profile containing the shared-shaping rate is applied to the VP node that is in the
default group and contains the best-effort queue.
host1(config-qos-profile)#atm-vp node scheduler-profile shared-5Mbps
host1(config-qos-profile)#atm-vp node group AF scheduler-profile 2Mbps
host1(config-qos-profile)#atm-vp node group EF scheduler-profile 400Kbps
Create a VC node for the default group.
host1(config-qos-profile)#atm-vc node
Create queues for the best-effort, video, and voice traffic.
host1(config-qos-profile)#atm-vc queue traffic-class best-effort
host1(config-qos-profile)#atm-vc queue traffic-class AF
host1(config-qos-profile)#atm-vc queue traffic-class EF
host1(config-qos-profile)#exit
Attach the QoS profile to an ATM subinterface.
host1(config)#interface atm 11/0.1
host1(config-interface)#qos-profile vpSharedShaping
VP1 EF group node
VP1 AF group node
VP1 default group node
Configuring Compound Shared Shaping on page 100
Compound Shared Shaping Overview on page 99