Configuring The Scheduler Hierarchy For Subscriber Load Balancing In 802.3Ad Link Aggregation Groups - Juniper JUNOSE 11.1.X - QUALITY OF SERVICE CONFIGURATION GUIDE 3-21-2010 Configuration Manual

JUNOSe 11.1.x Quality of Service Configuration Guide
Related Topics
Configuring the Scheduler Hierarchy for Subscriber Load Balancing in 802.3ad Link
Aggregation Groups
The type of load balancing that the system performs depends on the configuration
of the scheduler hierarchy in the QoS profile.
To configure the scheduler hierarchy for subscriber load balancing:
1.
2.
3.
4.
Related Topics
192

Configuring the Scheduler Hierarchy for Subscriber Load Balancing in 802.3ad Link Aggregation Groups

host1(config)#qos-port-type-profile lag qos-profile ethernet-default
QoS for 802.3ad Link Aggregation Interfaces Overview on page 183
qos-port-type-profile
Configure the QoS profile.
host1(config)#qos-profile subscriber-lag
Configure the queues and nodes for VLANs and S-VLANs.
host1(config-qos-profile)#vlan queue traffic-class best-effort
host1(config-qos-profile)#vlan queue traffic-class tc1
host1(config-qos-profile)#vlan node scheduler-profile subscriber
host1(config-qos-profile)#svlan node scheduler-profile svlan
host1(config-qos-profile)#svlan node group g1 scheduler-profile svlan
Create the LAG interface and assign member interfaces.
host1(config)#interface lag lg1
host1(config-if)#member-interface gigabitEthernet 3/0
host1(config-if)#member-interface gigabitEthernet 3/1
Attach the QoS profile to the LAG interface.
host1(config-if)#qos-profile subscriber-lag
QoS for 802.3ad Link Aggregation Interfaces Overview on page 183
Subscriber Load Balancing for 802.3ad Link Aggregation Groups Overview on
page 186
Enabling Default Subscriber Load Balancing for 802.3ad Link Aggregation Groups
on page 191
interface lag
member-interface
node
qos-profile
queue